Bluetooth speakers have so much going on; they are not only portable but also have some of the best audio quality. They are not comparable to regular speakers but still deliver great audio, especially for smaller rooms.
Sometimes you might notice that your Bluetooth speakers are not as loud as you would want them to be or that the audio quality drops. What do you do?
There are multiple reasons why your Bluetooth speakers might not be playing at their optimal performance. For example, the size of your room or the speaker’s audio settings can interfere with your audio, so how do you fix it?
Today, we will be looking at how to make Bluetooth speakers louder. This will cover some of the problems that might cause your speaker’s volume to be low and the simple solutions you can use to fix this.
7 Best Ways to Make Your Bluetooth Speaker Louder
Try out the following seven steps to learn how to make your Bluetooth speaker louder:
1. Check the Audio Settings
The most obvious reason that could make your speaker sound muffled or have a lower volume could be that you have not adjusted the audio settings. The speaker volume might not be at its maximum. If this is the problem, try adjusting it to the highest possible.
However, you should be careful with this, as playing your speakers at the loudest volume could harm them in the long run. Turn your volume up as high as possible but avoid going for the highest setting.
Another reason your Bluetooth speaker might not be as loud as you want could depend on the device you are using or the audio you play.
Some devices naturally don’t exceed a certain volume limit to protect your ears. In some cases, ear protection might have been automatically enabled, especially during loud songs, causing the device to reduce the volume automatically.
Some songs or audio can have a lower volume than expected. If you think this is the problem, try switching to a louder song and check the speaker’s performance. If the volume is still low, check the speakers themselves to adjust the volume.
2. Evaluate the Size of the Room
The room size can be another reason your speakers don’t seem loud. A bigger room will produce louder noise from the speaker, making it sound lower than it actually is.
Bluetooth speakers can regulate the amount of sound they put out depending on how big the room they are in. Your speaker’s volume might not seem too loud because it has adjusted to the room and reduced the volume.
This happens mostly in smaller rooms. Place the speaker in a larger room as this gives it more surface to bounce around, effectively increasing the volume.
You can also use the room to identify the best positions to place the speaker. Open spaces have better volume control than enclosed ones. If you are in a crowded or stuffy room, find a higher position, such as on top of a chair, to place the speaker.
This allows the speaker to project the volume on the open air above.
You also want to check your equalizer settings, as this will allow you to balance the speaker’s sound waves. Find the perfect balance between the higher and lower-frequency sound for a better speaker volume.
Recommended: The 10 Best In-Ceiling Speakers for Home Theater in 2022.
3. Place it on a Solid Surface
This is a trick many of us used to do when we were younger, before Bluetooth speakers were a thing. We would place the speakers on a solid surface, such as on a plate or inside a cup, to amplify the sound. I was surprised to learn that the same thing applies to Bluetooth speakers.
The science behind this is that flatter surfaces give the sound waves more space to bounce around compared to cushioned or cluttered surfaces.
Place your speaker on the floor and see what a big difference it will make. The vibrations have a larger space to cover and will give you high-quality sound.
If you cannot place your speaker on the floor, try moving it close to the wall or at the corner of the room. The walls will act as an equalizer, giving the speaker more room for a higher volume.
There is a caveat to this tip, however. Do not place your speaker too close to the wall or directly on the floor. Find some kind of barrier between the speaker and the floor.
Placing it too close to the wall will cause some interference between the speaker’s sound and the wall.
4. Check the Surrounding Area
Make sure the area you place your speaker on is not close to any furniture or other obstacles that might obstruct the soundwaves.
It is best to find an empty room or a room with a lot of free space. Find a corner and place your speaker either directly on the floor or on a raised solid surface for better audio control.
Obstacles tend to absorb the sound around them, which can reduce the speaker’s power. For example, placing the speaker on a carpeted floor will result in the carpet absorbing the sound, leading to a lower volume.
The same applies to rooms with heavier curtains or that are surrounded by furniture.
Play with your surroundings and move your speaker around the room to find the perfect area to place it. Use the same song when moving it around to notice how the speaker will perform in the different areas.
Your speakers can also have poor-quality sounds because of too much acoustics. This can make your audio sound tinny.
If this is the issue, try moving your speaker to an area with more stuff around it. The obstruction that the objects bring will modify the volume, giving you a more desirable audio quality.
5. Use an Amplifier
An amplifier is one of the best things you can use to make Bluetooth speakers louder. It does exactly what it says in the name and amplifies the audio. There are different kinds of amplifiers; some are small, while others come in bigger sizes.
Some Bluetooth speakers come with their own amplifiers, but in most cases, you will have to purchase one separately. There are different kinds of amplifiers, one being the pre-amplifier. This kind of amplifier works more on low-level audio, helping you hear bass audio clearly.
Another kind is the power amplifier. This amp amplifies the work done by the pre-amp and powers it even more. It is a good choice for the balance between low-frequency and high-frequency sounds.
If you don’t want two different amplifiers, getting the integrated amplifier is your best bet. It combines the best power amplifier and the pre-amplifier features in one unit for the ultimate experience.
Depending on the amp you get, you can either use Bluetooth to connect it or use a wired connection. Go for a High-Fidelity or Hi-Fi amp, as it is the best in providing high-quality sound.
Whatever amplifier you get will increase your speaker’s performance and give you a great listening experience.
6. Check the Battery Power
Another reason your Bluetooth speaker might have a low volume is that it is running out of battery. Bluetooth connections tend to drain batteries a lot; the lower your battery gets, the lower the volume.
Check your speaker’s battery regularly to know when it is about to run out. Charge it whenever it gets too low or when the sound quality starts to drop to prevent listening to mediocre audio.
You might also consider charging the speaker whenever it is not in use to make sure it’s always fully charged.
The dropping volume could also be an indicator that your speaker is tired. This happens if you have been using the speakers for a long time without giving them a break.
Like other machines, speakers can weaken over time, and they need some recovery time to get back to optimal performance.
Using your speakers throughout can wear the mechanism down, causing a drop in the quality. Letting your speakers rest when not in use is a good way to combat this exhaustion.
Recommended: How to Connect a Subwoofer to An Old Amplifier?
7. Use Two Speakers
The last tip on how to make Bluetooth speakers louder is to supplement them with another speaker. This is a good tip if your speaker does not have much power to begin with, or if you have a big crowd or a big room.
The second speaker acts as an amplifier, boosting the volume and providing a much clearer sound quality than one speaker can do on its own.
Some phones also have this feature, enabling you to connect more than one phone to create a louder volume.
The second speaker that you acquire should also have better audio qualities. For example, it should be able to sustain louder volumes without failing, so check on the equalizer settings to make sure it’s good.
If in doubt, ask the shop attendants to help you find speakers that are compatible with your original speaker. Both speakers need to have similar features as this helps with the sound configuration.
Speakers that are not compatible can cause audio interference, which ruins your listening experience. Look for speakers that can connect to each other and make sure the audio settings match for the best results.
Last Words
The 7 steps above will help you learn how to make your Bluetooth speaker louder. We have covered every possible reason that could lead to poor performance and the best solutions.
Remember not to place your speaker directly on the floor or too close to walls for better quality. You should also avoid turning your speaker’s volume to the max as this could shorten its lifespan.
Pay close attention to the equalizer and other audio settings to make you are using your speakers properly. Buying an amplifier or another set of speakers should be your last option after everything else fails.
Try the above methods to fix your Bluetooth speaker, and let us know which solution worked.